Today I did the rear differential breather mod. I used 3/8″ fuel line, and ran it up to the gas filler. However, I didn’t cut through the plastic to have it exit at the filler cap. Instead, the line is zip-tied to the filler hose and left up in the cavity between the fender and bed liner.
Today I’m going to review my experience creating new foam inserts for two Halliburton Zero cases that I use for a Fuji GX-617 camera. I used a company called My Case Builder, and the entire process took about two months, which is crazy when you think about it. However, when you break down all steps involved, it’s somewhat justifiable, or at least understandable. My hope is to inform others who are thinking about doing something similar, and perhaps help you in the process.
Today, I debadged my truck. Not sure what that is? Keep reading.
One of the things that bugs me about this truck was the ambient outside temperate gauge being tied to a HD radio station through the Entune Audio system. Really dumb in my opinion. It would literally tell me the temperature of a city 30 miles away!!! This needed a desperate fix.